Please note javascript is required for full website functionality.

Get yourself some premium quality tools made and engineered in Italy for European Vehicles (BMW, Ford, Skoda, Mercedes, VW, Audi, Renault, Peugeot):

Govoni tools - Italian made

 

SUSPENSIONS:

  • SHOCK ABSORBERS:
Pneumatic coil spring compressor - extra heavy duty (321111000).                                                                                            
Blocking vice for shock absorbers - STANDARD (321088000).                                                                                                         
Special kit for mounting shock absorbers with stop buffers (BILSTEIN) (321119000).                                                                        
Diagnostic wheel alignment tool set for hubs and shock absorbers (321104000).                                                                            
Special device for swinging arms removal, suitable for cars and commercial vehicles (322010000).                                                     
Mechanical shock absorber spring compressor kit - Set of n.2 long and short screws + n.4 jaws (320010000).                                      
Pneumatic coil spring compressor - Passengers cars (321055000).                                                                                                          
Pneumatic coil spring compressor - passengers cars, SUV and commercial vehicles (321056000).                                                         
Multi-steering knuckle spreader tool (321118000).                                                                                                                               
Special device for swinging arms removal (single) (322022000).                                                                                                          
  • HUBS BEARING:
Extraction set drive shafts and CV joints from the hub (320021000).                                                                                                     
Tool set for silent blocks (322020000).                                                                                                                                                
Tool set for silent blocks with hydraulic cylinder 17 ton (322021000).                                                                                                     
Extraction set for inner rings nut of the bearings (320022000).                                                                                                               

 ENGINE:

  • VALVE
Pneumatic valve spring compressor. ACCESSORIES INCLUDED (315020000).                                                                                           
Heavy duty pneumatic valve spring compressor. ACCESSORIES INCLUDED (315021000).                                                                          
Manual bench complete with 3 pressure feet with adaptors. ACCESSORIES INCLUDED (315019000).                                                          


  • GENERAL REPAIR:
Carburetor float remover equipped with 5 series of extensions (390003000).                                                                                            
Kit for mounting and dismounting the new stretch timing belts without damaging pulleys and belts (313198000).                                       
Adjustable wrench for locking and rotating pulleys (313034000).                                                                                                                  


  • ENGINE & GEAR BOX:
Engine support with universal telescopic arms (314032000).                                                                                                                   


TIMING TOOLS: 

  • Opel / GM:
Timing tool set suitable for ASTRA and SUZUKI - petrol engines (310019000).                                                                                         
Timing tool set suitable for ASTRA 1.4 - 1.6 - 1.8 petrol Twinport 16V (belt) engines (310151000).                                                           
  • BMW:
Timing tool set suitable for BMW 1.8 - 2.0 N42 and N46 (chain) petrol engines (310146000).                                                                   
Timing tool set suitable for BMW 1.6 N40, N45 and N45T petrol engines (310159000).                                                                            


  • VW / AUDI / SEAT / SKODA:
Timing tool set suitable for VW Group 1.2, 3 cylinder petrol engines (310098000).                                                                                  
Timing tool set suitable for VW Group 1.4 petrol engines (310126010).                                                                                                   


 GENERAL REPAIR:

Special kit suitable for SAC clutches, centering included (318015000).                                                                                                    
kit of tools suitable for SAC - It is equipped with 2 plates: 3-arms and 4-arms + Centering (318010000).                                                  
Special universal extractor for steering system - Ø 43,2 mm - 20,25 mm (385001000).                                                                           

 

MERCEDES:

MERCEDES bracket set (320014000).                                                                                                                                                  

 

FORD:

Wrench for mounting and dismounting oil filters seat (312063000)- FORD FOCUS.                                                                                  

 

PEUGEOT / CITROEN :

 

Wrench for mounting and dismounting oil filters seat (312063000).                                                                                                         

 

 

Extra heavy duty pneumatic valve spring compressor (315024000)

Extra heavy duty pneumatic valve spring compressor. ACCESSORIES INCLUDED.
Full pressure feet supplied Jaws handle springs from 19 mm. to 50 mm. (3/4“ to 2“) diameter. Quick and precise adjustment in millimeters increments thanks to its locking handle.

Cylinder: Stroke
Cylinder stroke is 90 mm. (3“ ½) that allows to compress any kind of springs and at same time guarantees safety.

Cylinder: High Power
It needs only 6 bar (90 psi) of compressed air to operate. With a working pressure of 10 bar (145 psi) the Spring Compressor force is 500 Kgf (1.102 lbf).

Aluminium Technology
The cylinder is made in light alloy and nylon resin with fiberglass avoiding consequently the corrosion and the oxidation of the parts of the machine.

Strong C-Frame system
Heavy-duty frame is CNC-machined and made of quality steel 

Safety Valve
The drive valve can function only when the Spring Compressor is connected to the compressed air system. Consequently the machine can be disconnected while the spring is compressed without dangers assuring the maximum safety.

CE approved machine in compliance with 2006/42/CE (Machine Directive).
Machine Dimensions: 630x300x95 mm
Pack dimensions: 485x375x185 mm
Machine weight: 7,2 Kg
Packaging weight: 9 Kg
Working: pressure min 6 bar, max 10 bar
Power: 10 bar=500 Kgf

 

 

 

 

New Multi-steering knuckle spreader tool (321118000) - Italian made

This set allows you to open the Clamp Bore to ease the removal and installation of locked components such as shock absorbers, Balljoints, etc. 


AVOIDS HAVING TO USE HAMMER AND CHISEL.


Suitable for machining steel or aluminium components.

Wide range of application: VAG, BMW, Ford, PSA, Renault, Nissan etc 
Makes the dismantling of shock absorbers, ball and universal joints easier 
15 pcs.

 

 

 

 

SWINGING ARMS AND SHOCK ABSORBERS REMOVING TOOL FOR CARS (322022000) - Italian made

 

Special device for swinging arms and shock absorbers removal, suitable for cars and commercial vehiclesImpact wrench operation (Max torque 50Nm)

UNIVERSAL – FITS ALL CARS AND COMMERCIAL VEHICLES


Only one operator required to carry out the entire assembly. `CASE 1: Removal of both oscillating arms. `CASE 2: Removal of shock absorber. `Ultra-fast operation: use of impact gun. `Sliding support foot to fit any underbody. 


Load capacity: 200 Kg.


50% TIME SAVING compared to traditional lever arm detaching tools on the market


Timing tool set suitable for ASTRA and SUZUKI - petrol engines (310019000) - Italian made

OPEL: Corsa, Agila, Astra, Meriva

SUZUKI: Wagon R+

Enigne: 1.0 12V., 1.0 16V, 1.2 16V, 1.4 16V (chain)

  

Wrench for mounting and dismounting oil filters seat (312063000) - FORD FOCUS - Italian made

Wrench for mounting and dismounting oil filters seat. As indicated on the plug, tighten it max at 25Nm.

The usage of this wrench is highly recommended for mounting and dismounting oil filters plastic seat.
This wrench has been projected in order to make work faster and easier, avoiding contact with wiring and intake system.
The upper ½” connection of the wrench has to be used with a dynamometric wrench.

Citroën: C4, Picasso, Grand Picasso, C5
Ford: C-Max, Focus, Galaxy, Kuga, Mondeo, S-Max
Peugeot: 308, 3008, 508, 5008, 407, RCZ

Engine: 2.0 - 2.2 HDi/TDCi
Engine codes: DW10C - DW12C

                   


Timing tool set suitable for VW Group 1.2, 3 cylinder petrol engines (310098000) - Italian made

VW: Fox, Lupo, Polo
Engine: 1.2 6V, 1.2 12V

SEAT: Ibiza, Cordoba
Engine: 1.2 6V, 1.2 12V

SKODA: Fabia, Roomster
Engine: 1.2 6V, 1.2 12V



Timing tool set suitable for ASTRA 1.4 - 1.6 - 1.8 petrol Twinport 16V (belt) engines (310151000) - Italian made

VAUXHALL, OPEL: Corsa-D, Agila, Astra-G-H, Meriva, Zafira-B, Vectra-C, Signum, Insigna
Engine: 1.6, 1.8

CHEVROLET: Aveo, Cruze, Orlando
Engine: 1.4, 1.6, 1.8

ALFA
: 159
FIAT: Croma
Engine: 1.8

           

 

 


Pneumatic valve spring compressor. ACCESSORIES INCLUDED (315020000) - Italian made

Pneumatic valve spring compressor. ACCESSORIES INCLUDED.

Universal pneumatic tool for assembling and disassembling engine valves, suitable for all types of valves on petrol and diesel engines.
Practical and easy to use, it permits time saving up to 60 - 70%, especially during valve assembly.

APPOSITELY MADE FOR ENGINES WITH 4/5 VALVES FOR CYLINDER.

CE approved machine in compliance with 2006/42/CE (Machine Directive).
Case dimensions: 485x375x135 mm
Machine weight: 5 Kg
Working pressure: min 6 bar., max 10 bar
Power: 6 bar=75 Kg, 10 bar=125 Kg

         

        



Extraction set drive shafts and CV joints from the hub (320021000) - Italian made

The kit include the bushing for mounting mechadraulic screw (on request 270026000).

FLANGE - Thanks to its particolar shape, it allows to work on all types of wheel in commerce, from 3 up to 6 holes.


Centre distance 98 mm.
Centre distance 138 mm.
Holes N. 3 => 6
Screws M12 => M14

                                              

      


Timing tool set suitable for VW Group 1.4 petrol engines (310126010) - Italian made

VW: Polo, Golf, Golf Plus, Touran, Passat, Jetta, Eos, Tiguan

AUDI: A3

SKODA: Octavia, Fabia, Roomster

Engine: 1.4 and 1.6 FSi (chain), 1.4 Tsi


Pneumatic coil spring compressor - extra heavy duty (321111000) - Italian made

For passengers cars, suv, armour-plated and commercial vehicles.

Bracket supporting plate with double positioning.

Interlock protection systems on pneumatic cylinder, footpedal and safety guard.

Upper adjustable mirror.

Enhanced safety cage protection with additional highresistance polycarbonate panel.

New swinging upper jaws system.

Machine supplied with small and medium bracket.

Shock absorber stem supporting plate.

Equipped with rear wheels.

CE approved machine in compliance with 2006/42/CE (Machine Directive).

 

                          


313034000 Adjustable wrench for locking and rotating pulleys - Italian made

Adjustable wrench for locking and rotating pulleys.


Blocking vice for shock absorbers - STANDARD (321088000) - Italian made

                    


Special universal extractor for steering system - Ø 43,2 mm - 20,25 mm (385001000) - Italian made

Special universal extractor for steering system.

Ø 43,2 mm - 20,25 mm

                                      


MERCEDES bracket set (320014000) - Italian made

Mercedes: Classe A, B, E

                


Kit for mounting and dismounting the new stretch timing belts without damaging pulleys and belts (313198000) - Italian made

High time saving
High cost saving
Easy and fast belt replacement
Universally applicable due to the long slot

INCLUDED:
Belt fitting tool: Ø 50, Ø 32
Screws: M8x65 Ø 5,6 mm - L=32,5; M8x65 Ø 5,6 mm - L=11,5; M8x25 Ø 5,9 mm; M8x40 Ø 5,7 mm

 

 


Tool set for silent blocks (322020000) - Italian made

- The bearings can be used directly on the vehicle or under the press.
- Suitable for introduction/extraction of Silentblock of rear deck, of engine support, swinging arms, introductions of crankshaft oilseals, camshaft.
- Useful for introduction/extraction of wheel bearings.

                       


Timing tool set suitable for BMW 1.6 N40, N45 and N45T petrol engines (310159000) - Italian made

BMW: Serie 1 (E81/82/87/88), Serie 3 (E46), Serie 3 (E90/91/92/93)

Engine: 1.6

 

 


Special kit suitable for SAC clutches, centering included (318015000) - Italian made

This kit allows the easy dismounting, removal and replacement of all self-adjusting clutches SAC (SAC = Self-Adjusting-Clutch).

The kit includes a centring tool specific for SAC models with the diameter of the crankshaft bore (driving bearing seat) bigger than the diameter of the clutch hub and without the driving bearing.

It is equipped with 2 plates: 3-arms and 4-arms (specific for MB), for clutches with 6 or 8 locking holes.

                          


Heavy duty pneumatic valve spring compressor. ACCESSORIES INCLUDED (315021000) - Italian made

Heavy duty pneumatic valve spring compressor. ACCESSORIES INCLUDED.
Universal pneumatic tool for assembling and disassembling engine valves, suitable for all types of valves on petrol and diesel engines.
Practical and easy to use, it permits time saving up to 60 - 70%, especially during valve assembly.

APPOSITELY MADE FOR ENGINES WITH 4/5 VALVES FOR CYLINDER.

CE approved machine in compliance with 2006/42/CE (Machine Directive).
Case Dimensions: 485x375x135 mm
Machine weight: 6 Kg
Working pressure: min 6 bar, max 10 bar
Power: 6 bar=118 Kg, 10 bar=196 Kg

                     


Extraction set for inner rings nut of the bearings (320022000) - Italian made

The kit include the bushing for mounting mechadraulic screw (on request 270026000).

INCLUDED:
- Gripper Ø 35/40 mm
- Gripper Ø 40-45 mm
- Gripper Ø 45-51 mm
- Gripper Ø 50-55 mm
- Gripper Ø 55-61 mm
- Lock nut wrench Ø 83 mm
- Wrench Ø 59,5 mm
- Body extractor

     


Special kit for mounting shock absorbers with stop buffers (321119000) - Italian made

The new “ROD-STOPPER” is suitable for holding the shockabsorber rod, when mounting & dismounting the coils.


In fact the new generation of shock-absorbers has an Hydraulic-Gas cylinder that is retracting automatically when is
free from the coil.

  • Rod Range: MIN. Ø12 mm. - MAX. Ø 28 mm.
  • Material: Aluminum (for not damaging the Rod) (Ref. 321119004)
  • Thickness: 20 mm (ref. 321119004

              


Carburetor float remover equipped with 5 series of extensions ( 390003000) - Italian made

Carburetor float remover equipped with 5 series of extensions, that include also PSA and Renault models.

PSA
Renault

It covers different diameters: from min. 70 to max. 170 mm

                         


Diagnostic wheel alignment tool set for hubs and shock absorbers ( 321104000)- Italian made

Special diagnostic tool set, necessary for strain detection on hubs, shock absorbers and rear axle; with this tool the operator is able to find the non-conforming parts that have to be replaced because of collisions or potholes on the road.

 

- IMMEDIATE TRIAL ON THE WHEEL CAMBER
- HUBS, FRONT AXLE AND REAR AXLE FAST CHECK UP

                       


Engine support with universal telecopic arms (314032000) - Italian made

Thanks to this device, it is possible to work at the engine control (belt drive) without using engine cranes or transmission lifts, the engine compartment is freely accessible.

 

Telescopic arm (to 230 mm)
Load capacity 400 Kg
Sliding telescopic arm extension: min. 657 / max 887
Side-arms extension: min. 322 / max 566
Arms rotation of 360°; the device can be closed completely in order to be stored in small spaces.
The 2 supporting feet are adjustable in height, covered with a non-slip rubber, they can float up to 8° adjusting to the surface.

 

                     

Special device for swinging arms removal, suitable for cars and commercial vehicles ( 322010000) - Italian made

Only one operator required to carry out the entire assembly

Simultaneous removal of both oscillating arms

Detachment through belt which guarantees utmost safety and keeps arms intact

Sliding support feet to fit any underbody

Suitable for all track widths

Max torque 50Nm


Mechanical shock absorber spring compressor kit - Set of n.2 long and short screws + n.4 jaws ( 320010000) - Italian made

Set of n.2 long and short screws + n.4 jaws.

Designed to compress manually all MacPherson springs working directly on cars.
The strut can be removed without dismounting the bearing housing.

 

Capacity: 800 Kg
Spindle: 2 x M18 L=340 mm
Spindle: 2 x M18 L=185 mm
Working range: from 100 to 300 mm.

                                                                 


Timing tool set suitable for BMW 1.8 - 2.0 N42 and N46 (chain) petrol engines (310146000) - Italian made

BMW: Serie 3 (E46)

Engine: 1.8, 2.0

                  


Pneumatic coil spring compressor - Passengers cars (321055000) - Italian made

Pneumatic coil spring compressor - Pass engers cars. SAFETY VALVES LOCKING SYSTEM. ACCESSORIES INCLUDED.

SAL - Auto Leveling System
The two auto leveling upper arms allow to work easily both on conical and misaligned springs.

Cylinder: Stroke & Power
It is possible to use this auto leveling machine also in case of long shock absorbers as the ones instal led on commercial vehicles, off roads and wagons, thanks to its 330 mm stroke. With a working pressure of max 8 bar the machine exerts a compression force at 1226 kg without losing power.

Aluminium technology
The cylinder is made in light alloy and nylon resin with fiberglass avoiding consequently the corrosion and the oxidation of the parts of the machine.

Brackets system
The frontal and lateral clamps’ holders grant quick mounting and dismounting replacement both of the clamps and of the vice.

Foot-pedal and safety guard with safety valves
The foot-pedal works only when the safety valve is closed; if it is open the foot-pedal is blocked. Consequently the machine can be disconnected without dangers granting the maximum safety. If the safety guard remains open, the machine is equipped with a safety valve that does not allow working operations.

Tools Rack
The machine is equipped with a practical and steady tools rack.

CE 
approved machine in compliance with 2006/42/CE (Machine Directive)
Machine dimensions: 520x300x1400 mm
Packaging dimensions: 650x400x1400 mm
Machine weight: 65 Kg
Working pressure: max 8 bar
Cylinder stroke: 330 mm

      


Pneumatic coil spring compressor - passengers cars, SUV and commercial vehicles (321056000) - Italian made

Pneumatic coil spring compressor - Passengers cars, suv and commercial vehicles. SPECIAL VERS ION: NEW CYLINDER + MORE POWER + SAFETY VALVES LOCKING SYSTEM. ACCESSORIES INCLUDED.

ALS - Auto Leveling System
The two auto leveling upper arms simplify working on conical and misaligned springs.

Aluminium technology
The cylinder is made in light alloy and nylon resin with fiberglass avoiding consequently the corrosion and the oxidation of the parts of the machine.

Brackets system
The frontal and lateral clamps’ holders grant quick mounting and dismounting replacement both of the clamps and of the vice.

Foot-pedal and safety guard with safety valves
The foot-pedal works only when the safety valve is closed; if it is open the foot-pedal is blocked. Consequently the machine can be disconnected without dangers granting the maximum safety. If the safety guard remains open, the machine is equipped with a safety valve that does not allow working operations.

Tools Rack
The machine is equipped with a practical and steady tools rack.

CE approved machine in compliance with 2006/42/CE (Machine Directive)
Machine dimensions: 520x300x1400 mm
Packaging dimensions: 650x400x1400 mm
Machine weight: 65 Kg
Working pressure: max 8 bar
Cylinder stroke: 330 mm


kit of tools suitable for SAC - It is equipped with 2 plates: 3-arms and 4-arms + Centering (318010000) - Italian made

This special kit of tools suitable for SAC and traditional clutches allows easy dismounting and mounting clutch operations avoiding any problems. It is equipped with 2 plates: 3-arms and 4-arms + Centering.

The usage of this special clutch tool is basic also to dismount SAC clutches. In fact if we try to dismount a SAC clutch, the clutch will unadjust, causing problems during mounting operations, have a shorter life and cause a lot of vibrations.

Longer life clutch
Reduction of vibrations
Faster working time
For engines with manual-shift gear box.

HEAD BENCH (315019000) - Italian made

• Ideal for today small cylinder heads. 

• Head supports are adjustable and protected with non scratch plastic.

• The push rod is adjustable for deep valve chambers. 

• Comes with slide hammer and travel limit that guarantees the same stroke for each valve.

• When the valve spring is compressed, the machine can be locked allowing work to be done with both hands free.


Tool set for silentblocks with hydraulic cylinder 17 ton (322021000) - Italian made

  • The bearings can be used directly on the vehicle or under the press.
  • Suitable for introduction/extraction of Silentblock of rear deck, of engine support, swinging arms, introductions of crankshaft oilseals, camshaft.
  • Useful for introduction/extraction of wheel bearings.
  • HYDRAULIC POWER 17 T

                      



Special universal extractor for steering system - Ø 43,2 mm - 20,25 mm (385001000).

Special universal extractor for steering system.

Ø 43,2 mm - 20,25 mm