The TR470 reconditions in a very easy and precise way all kind of brake disc, drum or flywheel of cars and light trucks and, with proper accessories even of heavy duty vehicles.
|Min - Max drum capacity||150÷710 mm|
|Max drum depth||210 mm|
|Max disc capacity||860 mm|
|Max disc depth||150 mm|
|Max disc thickness||60 mm|
|Spindle speed||70–100–145 g/min|
|Variable speed feed||0÷27 mm/min|
|Spindle motor power||0,75 kW|
|Dimensions LxPxH||840x505x510 mm|
TR1000 is a heavy-duty brake drum/disc lathe for trucks and cars.
Its design is based on the very successful TR1500.
We add the CPS 150 Dual wheel support and powered cross slide feed for disc turning (TR1995) to complete the package.
The main features of TR1000 are its 'structural strength & reliability' due to the extensive use of cast iron for all the fundamental components including the base and table.
The controls & adjustments simple to use and are positioned for ease of operator reach.
Big diameter drum (or disc) mounting is possible by the use of AP50 adapter set which includes a 50mm diameter arbor and a wide set of centering cones,
We recommended that the TDL adapter kit with it's a 30mm diameter arbor cones & bells be included to so the machine can handle truck and automotive.
• Boring bar support
• Boring bar for large drums
• Large drum turning tool
• Truck drum silencer band
• Wrench set
• Instruction manual
• Safety guard (optional)
|Min-Max drum turning diameter||150-1170 mm|
|Min-Max disc turning diameter||0-855 mm|
|Longitudinal table travel||410 mm|
|Cross slide travel||145 mm|
|Spindle rotation speed||30-120 rpm|
|Longitudinal table feed||0-30 mm/min.|
|Cross slide feed (option)||0-30 mm/min.|
|Spindle motor power||1.5 kW|
|Table motor power||0.07 kW|
The TR 2000 is a very advanced machine particularly suitable for the modern brake reconditioning of all vehicles. Due the possibility to rotate the upper table, the taper flywheel reconditioning is allowable too.
The intermittent feed in both ways eliminates the "thread" effect in accordance with the modern requirement. On behalf of an automatic adjuster the feed can variate to suit the requested finish.
The spindle speed is fully adjustable from 10 up to 120 RPM on behalf of an hydraulic speed variator, actuated by an electronic push button device.
In order to eliminate all vibrations the machine frame is duly ripped to increase its rigidity. The switchboard is placed in a convenient position and it holds all the controls including the digital display.
|Maximum drum capacity||39"|
|Maximum disc capacity||27Ω|
|Traverse feed||12 5/8"|
|Cross feed||6 3/8"|
|Traverse intermittent feed||0.004-0.035"/rev|
|Cross intermittent feed||0.002-0.15"/rev|
|Spindle feed||10-120 RPM|
|Spindle feed variator||1.5 kW|
|Dimensions (LxWxH)||28 x 36 x 59"|